ASL INTERCOM F200, Quick Start Manual

Page: 27 / 73

Operating the F200
4.1.1.4 Selecting run/hold mode
In Hold mode the instrument measurement cycle is stopped.
Press the ‘ Hold ’ key to alternate between Run and Hold mode; a front panel LED indicates the
current state.
4.1.1.5 Selecting Units
Press the ‘ Unit ’ key to select the required measurement units, Resistance ( $ ), Celsius (°C),
Fahrenheit (°F) or Kelvin (K), the current selected units are displayed on the main display.
Changing the Units will automatically clear the maximum and minimum recorded values in statistics.
4.1.2 Configuration Mode
In configuration mode the instrument function is controlled from the three menu keys and the five
function keys now operating as soft keys. The function of a soft key is indicated on the VFD display
directly above the key.
To enter the instrument configuration mode press the ‘ Menu ’ key.
The instrument menu structure for ease of use is arranged as a series of top-level menu’s leading to a
series of sub menu’s. To cycle through the top level menus repeatedly press the ‘ Menu ’ key. To
select the required sub menu, press the appropriate soft key. To exit a sub menu and return to
temperature measurement mode press the ‘ Menu ’ key.
4.1.2.1 Top level menu
Chx PRT Din
Review Edit
Channel configuration menu, review or edit the channel
temperature conversion algorithm and coefficients.
Statistics menu, review or clear maximum and
minimum recorded values.
Statistics
Min Max
Options
Cal
Com Ver
Options menu, calibrate the instrument, set talk only
mode or review the instrument firmware issue.
Smart Probe
Review
Smart Probe review menu (menu only available if
smart probe detected).
Real Time Clock
Date Time
Real Time Clock menu set the real time clock date
and time.
Brightness
- +
Brightness menu set the display brightness.
Page 4-2 F200-14-001
ASL 2003