ASSEMBLY INSTRUCTIONS
STEP 1
Place floor panel on a
flat surface with round
STEP 3
Place roof on side
panels and slide
Hardware Included:
4 - 3” Cap Screws
4 - Hinged Screw Covers
4 - 2” Coated Deck Screws
flat surface with round
support rings facing
down.
Insert rear end panel
into
end opposite of drain
hole.
STEP 2
Insert side panels
into the floor and rear
end panel, front corner
first as illustrated.
panels and slide
into rear end panel
as illustrated.
STEP 4
Insert 2 Cap Screws through
2 Screw Hinged Covers.
Screw the assembly through
one of the holes near the top
of the end panel and into the
roof with a Phillips
screwdriver (snug only) then
close Hinged Screw Cover.
Continued
