27
EN
EN
EN
EN
EN
USE
Setting the clock
• Press and hold the
SELECT
button for about 2
seconds: the two digits corresponding to the time
will start flashing.
• Press
SELECT
repeatedly to set the correct time.
• Press
the
SET
button: the minute digits will start
flashing and the hour digits will return to fixed.
• Press
SELECT
repeatedly to set the correct
minutes.
• Press
the
SET
button to exit the setting.
Since time is stored in the vehicle battery, in case of
two batteries, it is convenient to set the clock with both
batteries installed to synchronize time. In any case, if
there are two batteries, the time stored for the battery
in compartment
A
is always displayed.
For battery description and positioning in
compartments
A
and
B
refer to chapter
"BATTERY
AND RECHARGE"
.
%
Km/trip
A
PWR
SELECT
SET
eSpro K Rev03 - EN.indb 27
eSpro K Rev03 - EN.indb 27
17/11/2020 11:01:37
17/11/2020 11:01:37
