Asko W6984 FI, Operating Instructions Manual

Page: 17 / 36

7
Close the washer door and press
the Start/Stop button
Time remaining
The time remaining is shown in hours and minutes.
Once a program is selected, the estimated program
time is displayed. This may differ from time to time
depending on the temperature of the water entering
the machine and the size of the load. If the program
time is longer than the previous wash with the same
program, "0:01" will be displayed until the program
finishes. This is normal! The next time you use the
program under similar conditions, the estimated
program time will be more accurate.
To add or remove washing after the program
starts
If you want to add or remove items after the program
has started, you can stop the program by pressing
and holding the Door opening button (key symbol)
for three seconds. When you restart the machine,
add any extra detergent needed and close the
washer door. The machine continues automatically
from the point where the program was interrupted.
Stopping or changing a program
You can stop a program by pressing the Start/Stop
button for three seconds. "Stop" appears in the
display. To restart the machine, select a new
program, add any extra detergent needed and press
the Start/Stop button.
NOTE!
Do not open the detergent compartment while the
machine is running.
8
Once the program has finished
The text "Done" is shown on the display.
The washer door opens automatically once
the program has finished. If you want to deactivate
the automatic door opening function, see the
"Selecting settings" section.
• Remove the load.
• Turn off the main power switch, this will save
energy.
If you have small children or pets at home, close the
washer door once you have removed the laundry.
Backlighting
Two minutes after the wash program finishes the
display backlighting enters energy saving mode.
Press the up or down arrow button if you want to
activate the machine.
17
Washing