15
Washing
6
Selecting options
You can select options to adjust the wash
program to suit your own specific
requirements. The available options depend on the
selected program. If the option is available for the
selected program, the symbols lights up when you
press the button.
The machine will remember the options you select
for each program (with one exception – Delayed
Start). You can still change the selected options the
next time you select the program in question.
Temperature
• Select the temperature by pressing the button
until the LED by the desired temperature lights.
• You can select temperatures between 20°C and
95°C. For Wool/hand wash you cannot choose
a temperature higher than 40°C. For Synthetics
or Easy Care the maximum temperature is
60°C.
Spin
• Select the spin speed by pressing the button
until the LED by the desired speed lights.
• You can select speeds between 400 and
1400 rpm, No spin or No drain. The maximum
spin speed varies according to the program
selected, so check the LEDs around the button.
•
, means that the program does not include a
spin cycle and ends by draining.
•
No drain means that the program does not
include a spin cycle and ends with the water
from the final rinse still in the machine. The
washing will remain covered by the water from
the final rinse, stopping it from getting creased.
If you have selected "No drain", you must select
the Spin & Drain program and the symbol
(no spin) once the program has ended to drain
the water from the machine before you open the
washer door.
Super rinse
Use the Super Rinse option if you want to
increase the number of rinses. The maximum
number of rinses is seven, and the number of
rinses varies depending on the selected program.
Recommended for persons with extremely
sensitive skin and/or in areas with very soft water.
This option cannot be selected with Rinse or Spin
& Drain.
• Select Super Rinse by pressing the button
under the symbol.
• An LED next to the button lights when this
option is activated.
Delayed start
When you select Delayed Start, the machine will
start 1–24 hours after you press the Start/Stop
button.
• Press the button by the symbol to activate
Delayed Start.
• By pressing the button again you can delay
the start in whole hours up to a maximum of 24
hours.
• Press Start/Stop, and the machine counts down
1 hour at a time and starts after the selected
delay.
If you change your mind and want to cancel
Delayed Start, you must press and hold Start/Stop
for three seconds.
NOTE!
Remember to press the Start button to start the
program..
NOTE!
Make sure the detergent compartment is
completely dry before you add detergent,
otherwise there is a risk that the detergent will
clump before the machine starts.
30°
40°
50°
60°
95°
800
1400
1000
400
Cold
