6
ELECTRICAL CONNECTIONS
The machine is delivered ready-
fi
tted with a plug
and is intended for connection to an ASKO Dryer,
which is equipped with a matching receptacle. The
plug supplied with the washer can only be used with
an ASKO Dryer. If the washer is used separately or
with another dryer, it must be on a separate 208-240
V single-phase circuit.
If the machine is to be used in a wet area, the supply
must be protected by a residual current device.
As supplied: 208-240 V, 60 Hz, 2000 W heating
element, 15 A fuse required.
Repairs and maintenance relating to safety or
performance must be carried out by a qualifed
professional.
Connection to a permanently wired supply point
must be made only by a quali
fi
ed electrician.
WARNING!
Certain internal parts are intentionally not
grounded and may present a risk of electric
shock only during servicing. Service Personnel
- Do not contact the following parts while
the appliance is energized: Motor, Pump and
Control unit.
Grounding instructions
This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of
least resistance for electric current. This appliance
is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with
all local codes and ordinances.
Freestanding installation
The washer can be placed next to the dryer. It
is essential that the machine is leveled and the
locknuts are tightened to prevent excessive vibration
during spin cycles. Also be sure to leave a minimum
of ½" of space between the washer and the dryer.
The height adjustment for the washer is 35½" to
37½" (900 mm to 950 mm). Do not raise it higher
than 34½" (876 mm).
Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a quali
fi
ed electrician or
serviceman if you are in doubt as to whether the
appliance is properly grounded.
Do not modify the plug provided with the appliance.
If it will not
fi
t the outlet, have a proper outlet installed
by a quali
fi
ed electrician.
