Asko W2084.W.U Instructions For Use Manual Download

Page: 8 / 52

Customer Care Center, 1-800-898-1879, www.askousa.com

PACKAGING

Remove all packaging.

Please sort the materials in compliance with local recommendations (see chapter ”DISPOSAL”).

TRANSPORT PROTECTION

Before using the appliance, remove the three transport bolts and plastic plugs which protect the appliance

during transport.

Release and remove the bolts as shown in the

gures.

To remove the plastic plugs holding the bolts,

squeeze them and then pull them out.

Remove the caps from the plastic plugs. Push

the caps over the three holes in which the plastic

plugs were inserted. Save the plastic plugs if you have

to transport your washing machine in the future.

If you wish to transport the washing machine, reinstall the bolts and plastic caps to lock the machine. This

will prevent any damage to the machine due to vibrations during transport. If you have lost the transport bolts

or plastic caps, replacements can be ordered at your dealer.

Art. No.

ID:

270698

Bolt

551188

Plastic cap (transport lock)

Please order three pieces of each item!

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

Summary of Contents for W2084.W.U





















































Search results

Summary of Contents for W2084.W.U

Reviews:

Related manuals for W2084.W.U

Brands by name

Popular brands

Asko W2084.W.U, Instructions For Use Manual

Search results

Summary of Contents for W2084.W.U

Reviews:

Related manuals for W2084.W.U

Brands by name

Popular brands