manualshive.com logo in svg

Asko T741, User Manual

Share
Download
Asko T741 User Manual Download Page 21

21

FAULT INDICATIONS ON THE DISPLAY

If a fault or a failure occurs during the program,
an indication will be given on the display.
The table below shows the various fault codes.

Display shows

Explanation

Proposed measure

Overflow
This means that the condensation water container is
full. If the condensation water is pumped out directly
via the drain hose, check that the hose is free from
kinks or blockages. If this does not help, call service.

Empty the condensation water container and restart.
If the fault message appears again, this may mean
that the lower water reservoir is full because the pump
or the hoses are blocked or worn.

Maximum program time

The machine stops after it has operated for the max-
imum period (3 hours). Check and replace any blown
fuses in the electrical distribution box for the building.
To exit from the fault message, switch off the machine
or open the door. If this does not help, call service.

Thermistor fault

Thermal protection (Not fitted to all machines.)

Sensor fault

Fault in the moisture sensor. This fault message can
also be displayed if you are already operating with
dry clothes or an empty machine. The message should
disappear if you open the door. If not, call service.

NOTE

The main power switch 

 must be turned off

in order to reset the fault message.

Call service.

Clean the filter and the condenser.

NORMAL INDICATIONS ON THE DISPLAY

Display shows

Explanation

No program selected.

One or two digits, followed by an h.
Delayed start is selected, and the program has started. The display
shows the number of hours remaining until the program starts.

One digit and one H followed by two digits, or 1-2 digits on their
own, indicate that a program is running.
The display indicates in steps of 5 minutes the length of the program
time remaining in hours and minutes.

Program completed. Take out the washing.

Program in the cooling sequence. Wait until the pro-
gram ends.

When the Anti-crease option is activated, the drum will
rotate every minute. This text appears in the display during
this period. You can interrupt the program at any time by
opening the door.

Summary of Contents for T741





























Reviews:

No comments

Brands by name

Popular brands

Load more brands