Asko DWCBI241, Operating Instructions Manual

Page: 13 / 28

Options Settings
Setting for rinse aid dosage. The rinse aid dispenser can be adjust-
ed between 0 (Off) and 5 (High dosage).
0/1/2/3/4/5/TAB Rinse aid 7.
Increase the rinse aid dosage:
• If the dishes have water marks.
Decrease the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the rinse aid can
be diluted 50:50 with water.
When using an all-in-one detergent that contains rinse aid, you can
activate the setting TAB.
Temperatures can be displayed in °C (Celsius) or °F (Fahrenheit).
o
C/
o
F Temperature unit 8.
Adjusting the water softener. Read off the appropriate setting from
the water hardness table below.
0-3
4-5
6-8
9-11
12-14
15-19
20-24
25-29
30-39
40
0-5
6-9
10-14
15-20
21-25
26-34
35-43
44-52
53-70
71
°dH °fH °dH °fH 1) 2) 1) 2)
0/1/2/3/4/5/6/7/8/9 Water hardness 9.
Do not forget to put salt in the salt compartment after you have set
the water softener to 1 - 9.
For a water supply with a hardness under 4°dH (6°fH), select 0.
The water softener is deactivated and no salt is needed.
German water hardness scale
French water hardness scale
1)
2)
To exit the dishwasher's Settings menu, select Exit and confirm
your selection with Start/Stop.
Exit
13