Eco
2:15
Starting the dishwasher
Select a programme mode
Select any options
Press and hold the main power switch until the display lights up.
Select the programme
The main power switch
Open the door and press the main power switch. Also turn on the water
tap if it is turned off.
Select a programme
Eco is always pre-selected. To select another programme, press the
navigation button
until the desired programme is shown on the
display.
Select a programme to suit the type of dishes and how dirty they are.
Eco
This programme is intended for cleaning normally dirty dishes and is
the most effective programme in terms of combined energy and water
consumption.
You can read more about greener dishwashing in the chapter Loading
the dishwasher.
Auto
The dishwasher can measure how dirty the dishes are and adjust water
consumption and temperature accordingly. When newly installed, the
programme needs to be run five times before it is fully adapted and
can provide the best results.
Time program
The programme adapts to the specified running time or finish time.
With this programme it is important to choose a time suited to how dirty
the dishes are.
Slightly dirty dishes
0:15-0:45
Normally dirty dishes
1:00-1:30
Very dirty dishes
2:00-2:30
Press the
option button to set the desired programme time.
Rinse & hold
Used to rinse dishes while you wait for the dishwasher to become fully
loaded.
Hygiene
This programme is ideal to use where demands on hygiene are extra
high, e.g. for baby bottles and cutting boards. The temperature is high
both in the main wash and in the final rinse.
Quick
A fast and powerful programme for daily use for slightly dried leftovers.
(This programme is not intended for burnt food, such as on oven
dishes.)
Intensive
Programme for very dirty dishes, such as pans, casserole dishes and
oven dishes. If these dishes do not completely fill the dishwasher, you
can add plates and the like.
Select a programme mode
To select a programme mode, press the programme mode selector
until the desired mode is shown on the display. The available
programme modes vary between programmes.
Speed mode
The programme time is shortened, but the dishwasher uses more
energy.
Night mode
Lower noise level during the dishwashing programme. The programme
time is extended.
Select an option
To select an option, press the option button until the desired option is
shown on the display. The available options vary between programmes.
Auto Open
The dishwasher door opens automatically, which improves the drying
results. Wait until the dishwasher indicates that the programme has
ended and the dishes have cooled before unloading the dishwasher.
(If the dishwasher is built-in the surrounding furnishings must be
resistant to any condensation from the dishwasher.)
NOTE!
The dishwasher door must not be blocked when set to open
automatically. This can disrupt door lock functionality.
Delayed Start
When you select Delayed Start, the dishwasher will start 1-24 hours
after you have pressed the button Start/Stop and closed the door.
1. Press the button once to activate Delayed Start. Press the button
several times – or hold it in – to set the desired number of hours.
2. Press Start/Stop and close the door. The timer counts down and
the dishwasher starts after the selected delay.
If you want to cancel the Delayed Start option, open the door then
press and hold Start/Stop for three seconds.
START
STOP
Starting the dishwasher
Press Start/Stop until the display shows "Program started". This indicates
that the dishwasher is ready to start. Close the door properly, otherwise
the dishwasher will not start.
10
