Asko DSD433B, Operating Instructions Manual

Page: 12 / 24

Settings
Open the dishwasher's Settings menu
To open the dishwasher's Settings menu, press the navigation button until Settings menu is shown on the display and confirm
your selection with the mode selector .
To exit the dishwasher's Settings menu, select Exit and confirm your selection with the mode selector .
2. Child lock On
Mode selector to confirm current setting
Settings Current setting
Navigation button for selecting a setting
Options Settings
You can choose the language used for the display. English/Svenska/Dansk/Norsk/Suomi/
Nederlands/Français/Deutsch/Italiano/
Русский
/Español/Português/Sloven./
Eesti/Latviešu/Lietuvi
ų
/Hrvatski/Polish /
简体中文 / 繁體中文 / 日本語
Language 1.
You can activate the child lock (button lock) to prevent children
from starting the dishwasher.
On/Off Child lock 2.
To temporarily deactivate and activate the child lock, press and
hold the mode selector and the option button for Delayed Start
for 3 seconds.
Setting to hide the logo shown on the display. Logotype On/Off Display 3.
For adjusting the contrast of the display. Contrast 1/2/3/4
You can select which information is shown on the display. Prog. info screen T/S
S-Symbol (Symbol)
0:07
T-Text (Text)
Rinse & hold 0:07
This sound is used to confirm each button press. Feedback 0/1/2/3 Sound 4.
The buzzer indicates when a dishwashing programme has ended. Volume 0/1/2/3
Error messages are always indicated by a loud buzzer.
Setting for rinse aid dosage. The rinse aid dispenser can be
adjusted between 0 (Off) and 5 (High dosage).
0/1/2/3/4/5/TAB Rinse aid 5.
Increase the rinse aid dosage:
• If the dishes have water marks.
Decrease the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Build-up of foam. If you have very soft water, the rinse aid can
be diluted 50:50 with water.
When using an all-in-one detergent that contains rinse aid, you can
activate the setting TAB.
12