Rinse and hold
Used to rinse dishes while you wait for the dishwasher to become fully loaded.
Self-cleaning
Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms and spray pipes.
This program should be run (with no dishes in the machine) using normal dishwasher detergent or
citric acid – add it to the dishwasher's manual detergent compartment. (Detergent is not automatically
dispensed with Auto dose.) Special dishwasher cleaners are also available on the market. For the
removal of limescale deposits, see Dishwasher tub in the chapter Care and cleaning.
Lower half
You can use this program when you only want to wash plates and cutlery in the lower basket. Slightly
dirty dishes can also be placed in the upper basket.
Upper half
You can use this program if you only have cups and glasses that need washing in the upper basket.
Slightly dirty dishes can also be placed in the lower basket.
Anti-odour
3)
This program prevents bad odours from dirty dishes left in the dishwasher. Only the dishwasher’s
fan is activated (at regular intervals during a period of 96 hours).
Select program mode
Press
to scroll through the available program modes. The symbol is dimly lit in available program
modes, and glows brighter when a program mode has been activated. (The program modes you
can select vary between programs.)
Green
The dishwasher uses less energy and water. The program time is extended.
Speed
The program time is shortened, but the dishwasher uses more energy.
Night
Lower noise level during the dishwashing program. The program time is extended.
Intensive
The higher temperature dissolves grease on very dirty dishes, but the dishwasher consumes more
energy and water. The program time is extended.
UV cleanse
The water in the final rinse is sanitised with UV light and heat to kill microorganisms. The dishwasher
uses more energy and the program time is extended.
3)
Activate Odour control in the dishwasher’s Settings menu. See the Settings chapter.
22
Using the dishwasher
