Connection to hot water supply
Connect the dishwasher to the hot water supply (max. 70 °C) if the
building is heated using an energy-efficient means such as district
heating, solar power or geothermal power. Choosing a hot water
connection cuts dishwashing times and reduces the dishwasher's
energy consumption.
NOTE!
Do not exceed the permitted water supply temperature. Certain
materials used in some cookware cannot withstand strong heat. See
Fragile dishes in the chapter Loading the dishwasher.
Electrical connection
Information about the electrical connection can be found on the serial
number plate. This specification must match the electricity supply.
The dishwasher must be connected to an earthed socket.
The electric wall socket must be placed outside of the installation area
to be easily accessible after installing the dishwasher. Do not use an
extension cord!
NOTE!
Repairs and maintenance relating to safety or performance must be
carried out by a qualified professional.
Screwing the dishwasher into place
(Applicable only to built-in dishwashers.)
2x
After fastening the machine, check that the front feet still touch the
floor.
Screw the dishwasher into place with two extra screws
If there is an air gap of more than 3 mm between the underside of the
worktop and the top edge of the dishwasher, the dishwasher ought to
be screwed into place with two extra screws.
2x
KNOCK
OUT
24
Summary of Contents for DBI644IG
Page 1: ...Dishwasher DBI644IG OPERATING INSTRUCTIONS...
Page 27: ...Your notes 27...
