Troubleshooting
Action
Type of fault on the
display
1)
Front display
Clear the drainage pump. See the section Care and cleaning. If the problem persists, call
the service department.
Overfilling 1
F10
See “Water remains in the dishwasher” in the table “Problem” below. If the problem persists,
call the service department.
Water outlet fault
F11
Check that the water tap is on. Check that the outer filter on the inlet hose is not blocked.
If the problem persists, call the service department.
Water inlet fault
F12
Turn off the water tap and call the service department.
Inlet valve leakage
F40
Check plugs/fuses. If the problem persists, cut the power using the property’s main power
switch and call the service department.
Temp. stop fault 3
F41
Call the service department.
Thermistor fault 1
F42
Call the service department.
Pressure sensor fault
1
F43
Call the service department.
Temp. stop fault 1
F49
Check plugs/fuses. If the problem persists, cut the power using the property’s main power
switch and call the service department.
Temp. stop fault 4
F51
Turn off the water tap and call the service department.
Overfilling 2
F54
(UIC is an abbreviation of "User Interface Control"). Call the service department.
Communication fault
UIC
F58
(UIC is an abbreviation of "User Interface Control"). Call the service department.
Version UIC fault
F59
Call the service department.
Unknown fault
F60
1)
Press any button to clear the error message.
Action
Possible causes
Problem
Remove the arms and clean them.
The spray arms do not rotate.
The dishes are not clean.
Check that the dishes are not blocking the
spray arms.
Avoid large packages.
Old detergent. Detergent is a perishable
product.
Dose according to water hardness. Far too
much or far too little detergent results in
poorer dishwashing results.
Incorrect detergent dosage.
Select a more powerful programme.
Dishwashing programme too weak.
Do not cover porcelain with large bowls or
the like. Avoid placing very tall glasses in the
corners of the baskets.
Dishes loaded incorrectly.
Place dishes to sit steady.
Glasses and cups have toppled over during
the programme.
Screw the filter firmly into place. See the
section Care and cleaning.
The filter is not correctly fitted.
16
Summary of Contents for D5896XXLFI
Page 20: ...Loading the dishwasher See section Energy labelling 20 ...
Page 25: ...Your notes 25 ...
Page 26: ...Your notes 26 ...
Page 27: ...Your notes 27 ...