The supply pipe must be fitted with a stopcock. The
stopcock must be easily accessible, so that the water
can be shut off if the dishwasher has to be moved.
Once the installation is complete, the stopcock should
be opened to allow the pressure to settle for a while
and to check that all connections are tight.
Connect to cold water...
If you use oil or electricity to heat your home.
Connect to hot water (max. 70 °C)...
If you use district heating, solar power or geothermal
power to heat your home. Choosing a hot water
connection cuts program times and reduces the
dishwasher's electricity consumption.
NOTE!
Connecting a dishwasher to the water supply via
certain types of pressure limiting valves may restrict
the water supply!
This may cause F:12 error code/ Water inlet fault to
be displayed.
Electrical connection
Information about the electrical connection can be
found on the serial number plate This specification
must match the electricity supply.
Dishwashers fitted with a plug must be connected to
an earthed socket.
The electric wall socket must be placed outside of the
installation area to be easily accessible after installing
the dishwasher. Do not use an extension cord!
NOTE!
Repairs and maintenance must be carried out by a
qualified professional.
Adjusting the plinth (only when
using toe kick accessory)
The dishwasher is supplied with one or two toe kicks
depending on the model. The table shows which toe
kick you should use depending on the recess height
and plinth depth. Attach the enclosed soundproofing
material to the toe kick (certain models).
Plinth depth (mm)
Re-
cess
height
(mm)
100
90
80
70
60
50
40
30
L
L
L
N/A
N/A
N/A
N/A
N/A
820
L
L
L
L
N/A
N/A
N/A
N/A
830
L
L
L
L
L
L
L
L
840
H
H
H
N/A
N/A
N/A
N/A
N/A
850
H
H
H
H
N/A
N/A
N/A
N/A
860
H
H
H
H
H
H
H
H
870
Low toe kick (height=90 mm), article number 80
735 66
L
High toe kick (height=120 mm), article number 80
735 67
H
Not recommended for aesthetic reasons.
N/A
Recess height
Plinth depth
33
Installation
