0
Customer Care Center
1-800-898-1879
www.askousa.com
Step 1. Fitting the dishwasher in place
1. Loosen the mounting screws on the dish-
washer’s two front steel feet using a /8 inch
(1mm) open-ended wrench. Screw the
mounting screws down as close to the floor as
possible.
. Adjust the height of the dishwasher by turn-
ing the front steel feet with your hands. Leave
enough space to adjust them later.
. Screw in the back foot completely by turning
the adjustment screw at the front counter-
clockwise. Use a flat-bladed or
a 1/ inch nut
driver.