Page 6
PR
PR
PR
PR
PROGRAMS
OGRAMS
OGRAMS
OGRAMS
OGRAMS
To select a program, simply press the program button until the program you desire displays then press Start/
Stop
. The
programs are described below. You can also change certain program features. See “Options” below.
Heavy Wash (Cold, 85° – 170°/Sani F)
For heavily soiled loads, such as pots, pans, casseroles,
etc.
Normal Wash (Cold, 85° – 170° F)
For normally soiled loads, such as plates, glasses, bowls,
and lightly soiled pans, use the
Normal wash program
with
150°F
and
normal drying
To save more water and energy use 130°F and economy
drying.
Glass Wash (Cold, 85°– 140° F)
For glasses and delicate items, such as fine china and
crystal, that are washed immediately after use. When using
this program, you should set the temperature to low and
dry the dishes without heat.
Delayed Start
This option allows you to delay starting the dishwasher
from 1/2 hour to 24 hours. Press the Menu button until
Delayed Start displays, then press Set until the number
of hours you wish to delay starting the dishwasher
displays along with a flashing clock symbol. Press Menu
then press Start/
Stop
.
To cancel Delay after you press Start/
Stop
, hold down
the Start/
Stop
button for three seconds. If you change
your mind before you press Start/Stop, continue to press
the Set button until “0:00” is displayed.
THE CONTR
THE CONTR
THE CONTR
THE CONTR
THE CONTROL P
OL P
OL P
OL P
OL PANEL
ANEL
ANEL
ANEL
ANEL
Your ASKO dishwasher has our state-of-the-art electronic control panel, as illustrated below.
OPTIONS
OPTIONS
OPTIONS
OPTIONS
OPTIONS
Once you have selected a program, you can change some of the program features by using the options (described
below). To select an option, simply press the Menu button until the option you desire displays, then press the Set
button until the desired setting displays. Press Menu to confirm your selection. You can continue to make programming
changes or press Start/
Stop
to start the program.
DISPLA
DISPLA
DISPLA
DISPLA
DISPLAY
Y
Y
Y
Y WINDO
WINDO
WINDO
WINDO
WINDOW
W
W
W
W
The display window shows the programs, options, remaining program time and fault codes. It also allows you to
access the program menus and customize the wash programs. If you select Delayed Start, the window will display the
number of hours selected. When you press Start/
Stop
, the countdown time displays.
Remaining program time
– The remaining program time is calculated by the time it took the program to run last time.
(Note: The first time you run a program, the display will display
1:00.) As the program progresses, the time remaining
displays the hour and minutes (e.g.,
1:02, which means one hour and two minutes.)
OPERA
OPERA
OPERA
OPERA
OPERATING INSTR
TING INSTR
TING INSTR
TING INSTR
TING INSTRUCTIONS
UCTIONS
UCTIONS
UCTIONS
UCTIONS
Quick Wash (Cold, 85° – 140° F)
For lightly soiled loads that are washed immediately
after use. This program can also be used for delicate
items, but you should set the temperature to low and
dry the dishes without heat.
Pots and Pans (Cold, 85°– 170° F)
For the heaviest soiled loads, such as casseroles,
sauce pans, etc.
Rinse and Hold
To rinse dishes that you plan to wash later that day.
Temperature
The temperature can be changed in all programs, except
Rinse and Hold. Your choices are: cold, 85°, 105°, 120°,
130°, 140°, 150” 160°, and 170° F. (Note: The Glass ,
Quick wash and Rinse & Hold programs cannot be set
over 140° F.) To select a temperature, press the Menu
button until Temperature displays, then press the Set
button until the desired setting displays. Press Menu to
confirm your selection.
When you select 170° F, the word “Sani” displays.
Start/Stop
button
Programming
buttons
Display
window
Program
button
P o w e r
button
