The machine can also be connected to the drain
via a spigot connection. In this case the hose
should also be 600-900 mm above the floor. The
internal diameter of the hole should be at least 18
mm.
• Cut the nipple
• Remove burrs from the hole.
See the illustration.
At least 18 mm
Electrical installation
Connect the machine by plugging it into an
earthed wall socket. The electrical wall socket
must be placed outside of the installation area to
be easily accessible.
CAUTION!
If this appliance is supplied from a cord
extensions set or electrical portable outlet
device, the cord extension ser or electrical
portable outlet device must be positioned so that
it is not subject to splashing or ingress of
moisture.
Connection on delivery
The machine is supplied as 1-Phase, 220-230 V,
50-60 Hz, heat output 2000 W and has a 10 A
plug. Any residual current devices must be type
A.
NOTE!
Repairs and maintenance must be carried out
by a qualified professional.
30
Installation
Summary of Contents for Allergy W6888
Page 34: ...34 Your notes...
Page 35: ...35 Your notes...
