Askey RTV7805VW Quick Manual Download Page 17

European Union Regulatory Conformance 

The equipment complies with the RF Exposure Requirement 1999/5/EC; Council 

Recommendation of 12 July 1999 on the limitation of exposure of the general public 

to electromagnetic fields (0

300 GHz). 

Changes or modifications to this product not authorized by our company could void 

the EMC compliance and negate your authority to operate the product. This product 

has demonstrated EMC compliance under conditions that included the use of 
compliant peripheral devices and shielded cables between system components. It is 
important that you use compliant peripheral devices and shielded cables between 
system components to reduce the possibility of causing interference to radios, 
televisions, and other electronic devices. 

This equipment meets the following conformance standards: 
EN 301489-1/-17, EN 55032, EN 55024 
EN 300328,   

EN 62311 
EN 60950-1 

The device complies with RF specifications when the device used at 20cm you’re 
your body 

 

Federal Communication Commission Interference Statement 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions:   

(1)This device may not cause harmful interference, and   
(2)This device must accept any interference received, including interference that 

may cause undesired operation. 

 
This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules.    These limits are designed to 
provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications.    However, there is no guarantee that 

interference will not occur in a particular installation.    If this equipment does cause 

harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one of the following measures: 
 

Summary of Contents for RTV7805VW



















Reviews: