HARDWARE INSTALLATION
5
Blinking To indicate RF link status at different
speed.
1. Scan downstream channel. (2
sec cycle)
2. Downstream sync O.K and
receiving US parameters. (1 sec
cycle)
3. US ranging is O.K and receiving
IP and TFTP configuration.
(0.125 sec cycle)
4. Registration successfully. (Keep
On)
5. If cable lost sync happens after
registration, cable LED will keep
blinking (2sec cycle) until it
recovers again.
On
To indicate wireless link is present.
Wireless Wireless
Link/Data
Green
Blinking To indicate Wireless AP data.
2.1.2 Rear Panel Connectors
Figure 2-2: Rear Panel
