60
Transportation and Storage Conditions
De-commissioning the Welding Machine
Unpacking
When no welding work is done, place the machine in to its box to protect against dust and other
the adverse ambient effects, especially if it is to be transported long distance. Make sure that the
welding machine does not sustain hard impacts and do not drop the machine.
Lift and carry the machine from the handle. Do not lift or carry the machine while in operation. Do
not toss around the machine while lifting, carrying or operating and protect against impacts. The
insulation range of the machines under impact may be reduced.
If the machine is to be idle or stored for a long time before re-use, clean the machine and place it in
its original box and store in a dry and dust-free place.
When the service life of the machine expires and does not execute its functions
anymore, do not dispose of as household waste and throw in the thrash. Decommission
the welding machine in compliance with the local regulations.
ASKAYNAK Inverter 205-TIG/PULSE
welding machine is sold in a cardboard box. Do not buy the
machines that are not in the original packaging. To remove the machine from the box, open the top
cover of the box and pull out the machine from the protective bag.
Do not discard the box and bag, keep them for repacking or storing the machine
1- The welding machine has been designed and manufactured to consumpt low power when
turned on.
2- In order to prevent excessive energy consumption while welding, current values suited to the
electrode diameter should be used and using unnecessarily high currents should be avoided.
Efficient Use in Terms of Energy Consumption
• If the machine is used in an area with high electromagnetic fields, the welding/cutoff current
adjusted may exceed ±10%.
• This equipment is compliant with IEC / EN 61000-3-12.
Electromagnetic Compliance - 3
U
S
E
R
MAN
U
AL
