manualshive.com logo in svg

Ask Proxima IMPRESSION A6 - annexe 1, User Manual, Page: 37 / 47

Share
Download
Ask Proxima IMPRESSION A6 - annexe 1 User Manual Download Page 37

USER GUIDE

XGA LCD PROJECTOR

37

 

 

Disconnect the power cord before opening the lamp lid to
change the lamp.

 
 

To change lamp, unscrew  the lamp lid. A safety switch will cut off the power
supply to the lamp. Unscrew the lamp holder, fold out the handle and pull
out the old lamp holder. Insert a new lamp.

 

 

Screws

Handle

 

 

Projector seen from below

 
 

Push the lamp holder all the way until it positively stops and mount the
screw. Fold the handle and remount the lamp lid. Mount all screws well.

 

 

 

Use only original lamp and holder as specified. The lamp is
individually adjusted with the holder to maintain optimum
illumination. Replacement using a different lamp may result
in poor illumination, malfunction (potentially explosion) and
will void any warranties.

 
 

To reset the lamp timer, invoke the menu system under OPTIONS,
SERVICE, LAMP TIMER RESET. You need to confirm that you actually
intend to reset the lamp timer, or cancel if you accidentally invoked the
function.

Summary of Contents for IMPRESSION A6 - annexe 1
















































Reviews:

No comments