USER GUIDE
SVGA LCD MULTIMEDIA PROJECTOR
21
6.5
IMAGE ADJUSTMENTS
The trackball remote control is the main user interface by which the device
settings are adjusted. The remote control keys are used to adjust the
settings of the LCD projector correctly, either directly or through the menu
system, so as to achieve the best possible viewing conditions.
Alternatively, the top panel keyboard on the projector gives full access to
the settings.
Set-up should be performed once with the source(s) you are using most
frequently. Allow some minutes for the unit to warm up before adjusting
the settings. All settings will automatically be memorized individually for
each source for future use (see
Using the LCD Projector
).
Selection is performed by pressing the remote controls left button (left hand
side of trackball). After having finished the adjustments, press left again to
disactivate the function.
No special setup is necessary for video. Depending on source, some
positioning might be necessary.
OPERATION
LENS
•
Use focusing ring on projection lens to sharpen the
image on the screen.
Summary of Contents for Impression 880
Page 50: ......