manualshive.com logo in svg

ASIS Technologies R300 series, User Manual, Page: 2 / 10

Share
Download
ASIS Technologies R300 series User Manual Download Page 2

2 

 

Contents 

Document History ...................................................................................... 1

 

Federal Communication Commission Interference Statement .................. 1

 

1.1

 

R300 Series NFC Reader Overview ........................................ 2

 

1.2   Reader Wiring and Color Code ................................................ 3

 

1.3

 

DIP Switch Setting (See table 4,5 for detail) ........................... 3

 

1.4

 

Dimension ................................................................................ 4

 

1.5

 

Installation And Mounting Instruction ....................................... 5

 

1.6

 

Operation Guide ...................................................................... 6

 

1.7

 

Package List – R300 Reader ................................................... 9

 

1.8

 

Product Electrical Specification ............................................. 10

 

 

 

  

1.1  R300 Series NFC Reader Overview 

The R300 Series NFC Reader is a weather proof, high heat ABS NFC 
card reader. The R300 Series NFC reader can read a wide range of 
contactless smart card covering single size UID card to double size 
UID card. Card ID data can be output via industry standard Wiegand 
or Asis Proprietary RS485.  

Summary of Contents for R300 series











Reviews:

No comments