AF-300
11
3) The right and left side of this cultivator shall be the right and left side when
seeding the cultivator from its engine. So, after confirming the "Right" and "left"
as inscribed on each hexagonal part of the rotor assembly
⑥
(RIGHT, SMALL)
and
④
(LEFT, SMALL), assemble them into the right and left rotor
①
respectively so that the blade of each rotor assembly nay be symmetric mutually.
4) Then, after confirming the "Right" and "Left" as inscribed on each hexagonal part
of the rotor assembly
⑦
(RIGHT, LARGE) and
⑤
(LEFT, LARGE), assemble
them into the right and left rotor shafts
①
with each one set in the same
direction as each hexagonal fixing bolt of the rotor assembly
⑥
and
④
so that
the blade of each rotor assembly may be symmetric mutually.
5) If the rotor assemblies are assembled into the rotor shaft with them set reversely
in the right and left side, or each direction of the right and left rotor assemblies is
not symmetric mutually and consequently the blades of the large and small rotor
assemblies are wrongly, it causes the work to be done poorly and further the
engine to have an overload. So, please be much cautious not to assemble them
so wrongly.
4. Assembling of Forming Plates
[Fig. 4]
Summary of Contents for AF-300
