AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
(914) 476.9000 • (914) 476.0688
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
EZFill™ VANITY MOUNTED AUTOMATIC SOAP DISPENSER (PAGE 2 OF 2)
MODEL №:
0390-(n)
ISSUED:
01/14
REVISED:
12 JAN 2017
INSTALLATION
Install spout and sensor housing to vanity deck with anti-rotation kit escutcheon flange, rubber washers and basin nut
(supplied) through 1-1/8" diameter [Ø28.5] mounting hole and 5/32" dia. [Ø4] adjacent hole for anti-rotation pin of
escutcheon flange. Mount pump/control module to convenient structure under vanity within 24" [610] of shank bottom with
two (2) screws and wall anchors (supplied). Connect flex tubing from dispenser shank to fitting on top of pump/control
module. Connect soap supply flex tubing (provided attached to fitting on pump/control housing) to one of six available
connectors on Multi-Feed tank (supplied separately) so that tube end is just above bottom of tank. Connect spout control
cable plug into control unit inline cable connector. Mount battery compartment in convenient location under vanity deck
with two (2) screws and wall anchors (supplied) within easy reach of extension cable length and plug connector into mating
inline power connector. Install six (6) ‘D’-size 1.5V cells (supplied by others) in under-deck battery compartment according
to polarity indication, plug extension cable jack into battery box socket in cover handle and screw lock cover. Alternatively,
plug AC Adapter into GFCI power outlet located under vanity within 13.5 ft (412 cm) of pump/control housing and plug
connector into mating inline power connector.
OPERATION
System shall operate each time an object is positioned within the sensing range of 1-3/16" to 3-15/16" ± 3/8" [30 to 100 ±
10] directly in front of the spout of the dispenser. A stream of appropriate viscosity non-abrasive liquid soap drops with total
dispense amount of 0.03 oz (0.8 ml) will be pumped from the nozzle during each activation. Optional remote control unit
Model № 0390-R (supplied {one (1) per six (6) pack} or order separately) will allow owner programming of alternate
dispense amounts. See Model № 0390-R TDS and Owner’s Manual for complete description of functions. Unit will dispense
soap while batteries are at suitable charge level (or AC adapter is connected) and correct viscosity soap is present in the tank
and system is correctly maintained to enable dispensing (red LED is not flashing continuously or does not remain dark when
trigger attempt is made). LED will display red flash for sensing and continuous flashing for low battery condition. Push-
button releases soap for easy soap priming. System shall allow filling soap from top of vanity without requiring removal of
bottles under vanity. Up to six (6) individual dispensers will draw soap as required to operate until supply is depleted.
Unused transfer ports are blocked with solid plugs (provided) to prevent overflow, contamination and evaporation. Soap is
manually replenished and batteries are replaced on service interval determined by maintenance schedule. See OM & IG for
complete description of features and operations.
Schedule of Model № Suffix Codes and Application
Model № Suffix
Service Application
1A
Universal Model, Battery Operation
1AC
Universal Model, AC Adapter Operation
3AC
AU Model, AC Adapter Operation
6-1A
Universal Model, Battery Operation, Six Pack
6-1AC
Universal Model, AC Adapter Operation, Six Pack
6-3AC
AU Model, AC Adapter Operation, Six Pack