ASI Dental Specialties
3 – WARRANTY
www.asisupport.com
Page 2
65-0053 Rev-A, (10/01/20)
cement, impression materials, caustic irrigants, etc.), and the unpredictable maintenance regime to
mitigate clogging or malfunction.
•
Damage to Vacuum Pump from Liquid Contamination
. The waste canister has an overflow float switch
that will cut power to the vacuum pump in the event the canister begins to over fill. This will prevent
liquid and other contaminants from being pulled into the internal pistons of the vacuum pump.
However, improper maintenance can result in a malfunction of the overflow float switch or constant
overfilling of the canister can result in liquid contamination of the vacuum pump. This type of damage is
specifically excluded from warranty coverage.
•
Damage to Vacuum Pump and Air Compressor from Chemical Vapor Contamination
. If certain caustic
chemicals used in dental procedures (specifically bleach used in Endodontic procedures) is repeatedly
used in concentrated forms without rinsing with water, this can cause highly concentrated gases to be
pulled into the vacuum pump and air compressor system, causing corrosion to the internal working
components. Corrosion damage to the vacuum pump or the air compressor system from chemical gases
is specifically excluded from warranty coverage.
Specific Supplemental
E
lectronic Instrument Warranty
As a convenience to our customers, ASI offers to install new or used brands of instruments, not manufactured by
ASI, into our systems. This benefit enables customers to configure their systems with various instruments and to
realize the cost savings of incorporating already owned instruments. ASI’s standard one-year warranty is further
modified for these installed instruments, as follows:
ASI’s supplemental warranty does not extend the original term of the manufacturer’s warranty, does not include
items not covered under the manufacturer’s warranty, or warranty problems caused by, or resulting from,
misuse or accidental breakage.
Any installed instruments requiring repair will need to be removed and sent back to the respective manufacturer
for inspection and repair. It will be the responsibility of the customer for any labor costs incurred in the removal,
replacement, shipping, or packaging of these instruments. ASI will not be responsible for these costs or the
ability of the manufacturer to complete any necessary repairs in a timely manner.
ASI will provide a supplemental warranty for a period not to exceed one year from the date of purchase of new
components from other manufacturers installed into ASI delivery systems. This supplemental warranty is only
valid in the event a component manufacturer declines to honor its warranty due to the component’s removal
from its original housing. In the event the manufacturer declines to honor its warranty for an item that
otherwise would have been covered, ASI will reimburse the customer for the amount of the repairs billed by the
instrument manufacturer, not to exceed the selling price of the instrument.
Replacement Parts Limited Warranty
Replacement parts (either purchased or replaced at no charge warranty) do not affect or extend the original
warranty term provided. New replacement parts are provided with a 90-day warranty term from the time of
shipment and do not include any other costs such as labor for installation, removal, or shipping. These separate
costs are the responsibility of the customer. Soft goods such as filters, tubing, gaskets, O-rings, bulbs, etc. are
not covered under warranty due to damage that can occur by handling or improper installation. All other terms,
modifications, and exclusions provided in the system warranty apply to replacement parts.
