Ashton IEM250, User Manual, Page: 6 / 8

Select a group and/or channel:
Press SET button. Once GROUP is flashing press either or to select
a group as shown in . Press SET button again. Once CHANNEL is
flashing press either or to select a channel as shown in .
Press SET button again.
NOTE: When using multiple systems, set all transmitters to the same
frequency group for best results. After this, set up an individual channel
for each transmitter in the group.
Full Display:
Displays left and right track audio input level and transmitter working
frequencies, as shown in . Adjust the audio input level button to set
transmitter volume to a desired level.
Select a Group and/or Channel:
Press and hold the SET button. Once GROUP is flashing press either
or to select a group as shown in . Press SET button again. Once
CHANNEL is flashing press either or to select a channel as shown
in . Press SET button again.
Battery Status:
The battery life status is shown in .
Stereo/Mono Working Mode Display:
When the receiver receives the transmitted signal the STEREO or MONO
signs light automatically as shown in .
Full Display:
Displays battery status, RF/audio level, stereo/mono working mode and
working frequencies as shown in .
DESCRIPTION
SYSTEM SETUP: Transmitter Programming
SYSTEM SETUP: Bodypack Receiver Programming
1
1
2
2
3
3
1
2
3
4
5
1
2
3
4
5