PAGE 4
MP3 InPUt
CONNECTING THE MP3 PLAYER TO THE AMPLIFIER:
To connect your MP3 player to the BA20 amplifier you will need to purchase the
appropriate cable:
•
Most MP3 players require a 1/8” stereo to 1/8” stereo cable. An Ashton SC88
1/8” stereo to 1/8” stereo cable (pictured below) can be purchased at your
nearest Ashton dealer.
•
The MP3 input can also be used to input other AUX devices, such as CD player
units; you will need to purchase the appropriate cable for the device you wish to
plug into the amplifier.
WHEN PLUGGING AN MP3 PLAYER INTO THE AMPLIFIER:
When plugging your MP3 player into the BA20 amplifier, always make sure the volume is
turned to the minimum. Once plugged in, adjust the volume on the MP3 player accordingly
- this will protect both your amp and your ears!
Note: You can only adjust the volume of the MP3 player via the volume controls on the
MP3 player unit; the front panel controls on the BA20 only operate the bass guitar input/
output signal.
BA20_NEW.indd 4
27/04/10 4:28 PM