ashtech Reliance FS/2, Operation Manual

Page: 43 / 186

Field Operation 27
F
ie
ld
O
p
erat
ion
3. Press the R key and then the Yes key. The logo appears, as shown in Figure
3.1.
Press any key to start FAMlog. FAMlog turns on the receiver. The PWR/
SAT light, on the front of the receiver should flash red. After a few seconds,
the PWR/SAT light should flash green several times, then red, then flash
green several times. This cycle should repeat continuously. The red flash
indicates that the receiver is on, and the green flashes indicate the number of
satellites being tracked, e.g., four green flashes indicate four satellites.
4. The FAMlog screen appears, as shown in Figure 3.2.
Figure 3.1: Logo Screen
Figure 3.2: FAMlog Screen