manualshive.com logo in svg

ashtech Reliance FS/2, Operation Manual

Share
Download
ashtech Reliance FS/2 Operation Manual Download Page 24

8

Reliance with FS/2 Field Operations Manual

Each battery charger, Figure 1.10,  recharges a single battery. A completely drained 
battery requires four to six hours to fully charge.

Software

The software package comprises the programs necessary to control the FS/2 in the 
field, create feature definition files to use when recording features, process collected 
data, and format the data for export to GIS packages.

The software has three processing functions:

•

Pre-mission

•

Field

•

Post-mission

The pre-mission software is used to create feature definition files (FDF) which can be 
uploaded to the FS/2. These files comprise feature names, attributes, and attribute 
values. 

FAMlog™ - the field software running on the FS/2 - provides the capability to log 
features, attributes, attribute values, and positions in the field.

The post-mission software processes collected data, computes high-accuracy 
positions, displays collected data, and exports data to formats compatible with all the 
major GIS software packages.

 Figure 1.10: Battery Charger 

Summary of Contents for Reliance FS/2



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands