ashtech HDS800, Reference Manual

Page: 455 / 678

439
Query Command Library
Parameters
Example
$PASHQ,ANP,OW2
$PASHR,ANP,OW2,MAG111406,,*49
See Also
$PASHS,ANP,OW2
ANP,REF: Antenna Used at the Base
Function
This command returns the name of the GNSS antenna
assumed to be used by the base currently sending data to the
interrogated receiver (a rover).
Command Format
Syntax
$PASHQ,ANP,REF[*cc]
Parameters
None.
Response Format
Syntax
$PASHR,ANP,REF,s1,d2*cc
Parameters
Example $PASHQ,ANP,REF
$PASHR,ANP,REF,ASH111661,1*3D
Parameter Description Range
s1 Name of the second local antenna 31 characters max.
s2 Antenna serial number 31 characters max.
d3 Antenna setup ID 0-255
*cc Checksum *00-*FF
Parameter Description Range
s1 Name of the antenna used at the base 31 characters max.
d2
Antenna name preference:
• 0: s1 is ignored if incoming reference
data include base antenna name
• 1: s1 is always used; decoded base
antenna name is ignored
0, 1
*cc Checksum *00-*FF