ashtech HDS800, Reference Manual

Page: 243 / 678

227
Chapter 5. Ethernet Connection
Setting Up the Ethernet Connection
The Ethernet adaptor cable provided (P/N 702426) should
be used in all cases.
TCP/IP Connection
Within a Local
Network
In this case of use, the receiver and the remote system the
receiver has to communicate with are connected to the same
local network (LAN) and may even be in the same room. Here
the communication will NOT take place through the public
Internet, but simply within the local network.
The connection diagram typically is the following.
When the HDS800 is the server, the valid receiver IP address
to be communicated to the third-party equipment is the one
read on the receiver display screen. To read this IP address,
from the General Status screen, press the Scroll button twice
to access the Receiver Identification screen. The IP address
appears in the lower line.
Local Network
P/N 702426
Ethernet cable
Ethernet cable
RJ45
Hub or
Switch
Gateway or
ADSL Modem
Public Internet
HDS800
Remote
System
Ethernet port