97
Web Server Help Files Collection
Status Tab
Heading
This data group is shown only after a heading mode has been
activated and summarizes all the current results of the
heading computation (in tabular and graphic form).
SHMP Offset
Antenna parameter describing the vertical
offset of the Slant Height Measurement
Point, measured from the ARP, in meters.
ANT
Virtual Antenna
Name of the virtual antenna used, if any.
“OFF” if no virtual antenna is used.
ANP
Parameter
Designation
$PASHQ
Status
Heading measurement status:
• Fixed/Calibration
• Float/Calibration
• Fixed/Operation
Deduced
from ATT (f6
and f7)
Heading
Current heading angle, in degrees.
ATT
Pitch
Current pitch angle, in degrees.
ATT
Roll
Current roll angle, in degrees.
ATT
MRMS
Carrier measurement RMS error, in meters
ATT
BRMS
Baseline RMS error, in meters
ATT
Baseline Length Baseline length, in meters
Parameter
Designation
$PASHQ
ARP
SHMP Offset
Antenna radius
SHMP
Summary of Contents for HDS800
