Ashly R-052510 Operating Manual Download Page 12

Page - 12 

 

Operator Manual – SRA Series Amplifiers 

Copyright© 2010 – Ashly Audio Inc. 

Ashly Audio Inc. Limited Warranty (USA ONLY) 

(Other countries please contact your respective dealer or distributor) 
 

For units purchased in the USA

, warranty service for this unit shall be provided by 

ASHLY AUDIO, INC. in accordance with the following warranty statement: 
 
ASHLY AUDIO, INC. warrants to the owner of this product that it will be free from defects 
in workmanship and materials for a period of FIVE years from the original date of purchase. 
ASHLY AUDIO INC. will without charge, repair or replace at its discretion any defective 
product or component parts upon prepaid delivery of the product to the ASHLY AUDIO, 
INC. factory service department, accompanied with a proof of original date of purchase in 
the form of a valid sales receipt. This warranty gives you specific legal rights, and you may 
also have other rights, which vary from state to state. 
 
EXCLUSIONS: This warranty does not apply in the event of misuse, neglect or as a result of 
unauthorized alterations or repairs made to the product. This warranty is void if the serial 
number is altered, defaced, or removed. ASHLY AUDIO reserves the right to make changes 
in design, or make additions to, or improvements upon this product, without any obligation 
to install the same on products previously manufactured. 
 
Any implied warranties which may arise under the operation of state law shall be effective 
only for FIVE years from the original date of purchase of the product. ASHLY AUDIO, 
INC. shall be obligated to only correct defects in the product itself.  ASHLY AUDIO, INC. 
is not liable for any damage or injury which may result from or be incidental to or a 
consequence of such defect. Some states do not allow limitations on how long an implied 
warranty lasts, or the exclusion, or limitation of incidental or consequential damages, so the 
above limitations or exclusions may not apply to you. 
 
OBTAINING WARRANTY SERVICE: 
 
For warranty service in the United States, please follow this procedure: 
 

1.) 

Return the product to ASHLY AUDIO, INC, freight prepaid, with a written statement 
describing the defect and application that the product is used in. ASHLY AUDIO, 
INC.  will examine the product and perform any necessary service, including 
replacement of defective parts, at no further cost to you. 

 
2.) 

Ship your product to: 
Ashly Audio Inc. 
Attn: Service Department 
847 Holt Road 
Webster, NY 14580-9103 

 

 

 

Important Safety 
Instructions – 2 

Introduction - 3 

The SRA Series - 4 

Physical Description - 5 

Installation – 6 

Operation – 8 

Troubleshooting - 9 

Spec Table - 10 

Dimensions - 11 

Warranty - 12 

 
 

Summary of Contents for R-052510













Reviews: