Ashly Audio is a division of Jam Industries, Ltd.
Specifications Note: 0dBu = 0.775 VRMS
Input Sensitivity (Low Z models) 3.2dBu (4125/8125) 6.2dBu (4250/8250)
7.2dBu (70V/100V models)
Voltage Gain
26dB (Low Z models), 32dB (70V models)
35dB (100V models)
Damping Factor
>250 (8 Ohm load, <1kHz)
Distortion
<0.5% (SMPTE, typical)
<0.5% (THD-N, typical, 8 Ohm,
10dB below rated power, 20Hz–20kHz)
Channel Separation
-80dB (dB from full output, 1kHz)
Frequency Response
20Hz–20kHz, +/-1dB
Mic/Line Input Impedance
4.8k Ohms
Mic/Line Maximum Input Level +21dBu
Mic/Line Preamp Gain
0, +20dB, +40dB, +60dB
Mic/Line Phantom Power
+15V, switchable ch. 1-4, 5-8
Summed Mono
3.16k Ohm (Input Impedance)
+11dBu (Maximum Input Level)
Channel 1 TEL-PBX
3.9k Ohm (Input Impedance)
+21dBu (Maximum Input Level)
Preamp Output Maximum Level +8dBu
AUX Output Maximum Level
+20dBu
pema 8250 Rear Panel
pema
™
p
rotea
-e
quipped
m
edia
a
mplifier
Audio Connections
1 Euro connector balanced input, selectable for Mic, Line or TEL-PBX
7 Euro connector balanced inputs, software selectable for Mic or Line
8 pairs of unbalanced, summed mono RCA connectors optimized
for consumer line level (-10dBu) devices
8 Euro connector Preamp/Aux outputs
4 or 8 Euro connector speaker outputs
CobraNet® and Dante® Digital I/O options
Weights and Dimensions
Dimensions
19”W x 3.5”H x 15.5”D (483mm x 89mm x 394mm)
Unit Weight
4125/4250: 18.5lbs (8.4kg)
8125/8250: 20lbs (9.09kg)
Shipping Weight
4125/4250: 26lbs (12kg) 8125: 27lbs (12kg)
8250: 28lbs (13kg)
Environmental
40-120 deg. F, (4-49 deg, C) (noncondensing)
Remote Accessories
WR-1
2-Channel Level Control
WR-1.5
Level and Preset Recall
WR-2
Four-Position Switch
WR-5
Programmable Selector
neWR-5
Programmable Network Remote
FR-8
8-Channel Network Fader Remote
FR-16
16-Channel Network Fader Remote
RD/RW-8C
Serial Data Fader Remote
Ashly Remote
Remote Control Application for Apple® iPad®
PEMA uses Neutrik®
Components
Power Requirements
AC Mains
120VAC or 240VAC, ±10%
50–60Hz
Power Cable Connector
15A Edison, 3-Prong IEC
Rear Panel
Controls
Ethernet 10/100, Channel 1 TEL-PBX
Switch, Remote Standby, Preset Recall
(4), Remote Level (8), Remote Data
Connectors (each channel)
Input: Euroblock
Output: Euroblock
