Ashly P70 Owners Manual
Ashly P70 Owners Manual
Page
Page
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
DIMENSIONS
11
2
MOSFETS also do not have a “storage time” associated with them (a
phenomenon found in bipolar transistors in which a certain amount of time is
required to turn the transistor off). Therefore the MOSFET is said to be a “fast” device
which can function very accurately with high amplitude/high frequency signals
and transient waveforms.
The unmatched reliability of the power MOSFET output devices and the
integrity of the rugged mechanical design of the P70 series amplifiers ensure years
of maintenance-free service.
UNPACKING
As a part of our system of quality control, every Ashly product is carefully
inspected before leaving the factory to ensure flawless appearance. After unpack-
ing, please inspect for any physical damage. Save the shipping carton and all
packing materials, as they were carefully designed to reduce to minimum the
possibility of transportation damage should the unit again require packing and
shipping. In the event that damage has occurred, immediately notify your dealer
so that a written claim to cover the damages can be initiated.
The right to any claim against a public carrier can be forfeited if the carrier
is not notified promptly and if the shipping carton and packing materials are not
available for inspection by the carrier. Save all packing materials until the claim has
been settled.
POWER
Connect the P70 series amplifier to a standard 3-wire grounded electrical
outlet supplying 120 volts, 50-60 Hz (some export models are wired for 240 volts).
The power consumption is given in the Specifications section.
STANDARD CONNECTIONS AND CONTROLS
The rear panel of a P70-800 amplifier with the standard input panel is shown
in figure 1. For descriptions of other input options available, see the section on input
options.
