l
Primary and secondary Ethernet connection:
connects to ASTi’s ACENet, which
provides low-latency, network-based audio architecture for ASTi communication and
sound modeling equipment and software. For more information about this architecture and
scalable distribution network, go to the
l
Mode switch:
for every two channels, this switch chooses the amplifier's mode: bridge or
normal. In most cases, set the mode to normal.
Important
: Turn off the amplifier before changing the mode setting.
l
Input connectors:
removable Euroblock connectors for balanced analog audio signal
input. ASTi system setup does not use the input connectors.
Figure 5, "Ashly Power Amplifier rear panel" below shows rear panel connections on the Ashly
Power Amplifier:
Figure 5: Ashly Power Amplifier rear panel
The CAT5 Ethernet cables connect to the DATA LINK 10/100 Mbps port and either the
Primary or Secondary Network Digital Audio ports on the rear panel.
6
Copyright © 2019 Advanced Simulation Technology inc.
Ashly Amplifier User Guide (Rev. B, Ver. 0)
