P556-665
Page
9
of
46
INSTALLATION
Note:
DO NOT tighten any bolts until all bolts have been started; Philips screw driver NOT included.
1.
Attach the divider (F) to the back (J) with 2 bolts
¼ in x 30 mm (L), 2 flat washers (P) and 2
spring washers (R) by using the Allen wrench
(W) as shown on the right,(see Figure1).
Figure 1
2.
Assemble the left side (C), the right side (D) and back (J) together with
4 bolts ¼ in x 30 mm (L), 4
flat washers (P) and 4 spring washers (R) by using the Allen wrench (W), (see Figure 2).
Figure 2
