5
ASSEMBLY
6
10
9
7
8
3
2
5
4
1
Kit Contents
Key
Part Description
Qty.
1
26414
Clamp, Top Trim
1
2
26735
Right Panel, Facade
1
3
26736
Left Panel, Facade
1
4
26734
Central Panel, Facade
1
5
892455-3
Trim, Facade Side-Left
1
6
891435-1
Trim, Facade Top-Left
1
7
891435-2
Trim, Facade Top-Right
1
8
892455-4
Trim, Facade Side-Right
1
9
444-1B-S-2
Corner Key W/ Screw
2
10
444-2
Blank Corner Key
2
INSERT KEYS BEHIND FLANGE OF TRIM AS
SHOWN. BLANK CORNER KEY MUST BE IN-
STALLED FIRST. INSERT SECOND KEY. ADJUST
TRIM AND TIGHTEN SET SCREWS.
ASSEMBLY INSTRUCTIONS
1. Position stove in
fi
replace. Align facade panels with
fi
replace
and top of stove. The panels should be
fl
at against the
fi
replace
and standing vertical.
Notes: The side facade pieces go behind the top
piece.
The facade must be installed before unit is set
into
its
fi
nal position.
2. Mark the location of the facade panels along the top of the
stove with a pencil. The mark will be used to realign the panels
later.
3. Slide stove out of
fi
replace far enough to be able to work
behind facade panels.
4. Realign
the
fi
rst side panel with the mark made previously.
5. Using the predrilled holes in the facade panel as a guide; mark
and drill holes for the self tapping screws used to mount the
facade panel. See illustration on right below.
Note:
Align the mounting screws with the center of the
predrilled holes to allow for adjustment.
6. Repeat steps 4 and 5 for the other side panel.
7. Attach side panel trim as shown. See illustration on left below.
8. Attach top panel retainer with two self tapping screws.
9. Ensure venting is attached properly.
10. Align the top panel with the retainer and side panels
11. Attach top panel trim.
Note:
Stove and facade panels should realign with
fi
replace to
allow the panels to be
fl
at against
fi
replace and standing
vertically.