Page 4 of 23
4.
To install the back, align the female brackets in the back with the male brackets in the chair base, slide the back down on the base.
See
Figure B
Push down on the top of the back to lock the back into posi�on. You will hear a click from each side of the chair to
ensure the back is locked in properly.
5.
If your model has back wings, align the male the female brackets and slide the wing down into place, See
Figure C
. Please Note
there is a label on the brackets. Please assemble them as 1-1 and 2-2.
6.
Plug the Lumbar and Headrest, See the
Figure D
. If your model is Headrest Only, you only need to plug the Headrest.
F
igure C
F
igure B
F
igure D
Lumbar
Headrest
Lumbar
Headrest
SIGNATURE DESIGN BY ASHLEY
®
All Rights Reserved.
00145D
May , 2019
