User Manual
Ashley-Edison International Ltd
Page 39
Operation Instruction for Video Output
Composite video output (PAL or NTSC mode) option is available in this
Model
M2
camera. With this option you can view the live image captured by the
camera on a monitor or a recording device.
Before trying to use this option, ensure that the
Model M2
camera is switched
off.
• Properly connect the camera to the monitor (or recording device) with the
video cable supplied together with the camera
• Power on the monitor
• Power on the camera
• Enter the submenu Analysis under menu Setup, choose option Video
Output and set its value to be ON
• Press button M or Ok to save the setup and return to the live image
For PAL mode, live image is available in both the LCD screen of the camera
and the monitor (or recording device); For NTSC mode, live image is only
available in the monitor (or recording device).
• When viewing the live image, you can still use the buttons to control the
camera.
• After viewing the live image, power off the camera, monitor (or recording
device) and disconnect the cable
Note:
• It is required to power off the camera before connecting it to a monitor or a
recording device
• Before setting Analysis-> Setup-> Video output to be ON, the live image on
the monitor (or recording device) is not correct, because the video signals
have not been actually output yet
Power Alarm
• There is indication of power status at the right top of the outer screen of the
camera.
• When there is insufficient power, sound alarm will automatically turn on every
five minutes; there will be also a prompt as “
” on the right top of the
screen to indicate the power insufficient.
