5
3
3
3
Use ordinary nut.
1
1
1
3
PUSH
Spanner
Spanner
Spacer
Washer
Washer
Washer
Locate the other arm-
support on top of the
arms. Push 3 x 40mm
(1
5
⁄
8
”) round head bolts
through the holes in the
arm-supports and arms.
Fit small washers and
nuts but don’t tighten
yet.
Fit a small washer followed by the long
58mm (2 ¼”) aluminium spacer to the
100mm (4”) bolt. Apply a drop of oil to the spacer. Then
slide the wooden handle onto the bolt so the head of the
bolt is at the counter-bored end. Fit another small washer
and push the bolt through the arm-support and
arm from the same side as the other bolts. Secure
with a small washer and nylock
nut. Tighten with the 2 spanners
supplied. Then tighten all nuts.
