3
Drive Band
Leather Brake Band
Do not use the
large groove.
Rest Position
When not using your
e-Spinner Super Jumbo,
reduce the drive belt
tension by locating the
drive belt onto the small
bobbin whorl.
Middle Groove
5.
Locate the drive band onto the MIDDLE groove in the bobbin
whorl. Do not use the large groove as this will stretch the drive
band. We have used the Country Spinner2 Bobbin as standard on
the e-Spinner Super Jumbo, so they are interchangeable between
the two spinning wheels.
6.
Apply a drop of oil to the front
of the flyer shaft. Position the
flyer under the leather brake band
and into the front and rear flyer
bearings.
7.
Carefully stretch and roll the
drive band onto the motor pulley.
8.
Turn the tension knob so the
leather brake band is quite loose.
Under most spinning conditions
the leather brake band should be
loose.
