It is always recommended to anchor the unit to the ground. Drill through
the four holes in the base of the unit using 6mm dia masonry drill to a
depth of 70mm. Screw in the anchor fixings. (These have a self cutting
thread). If not anchoring the unit, fit the self seal plugs BEFORE
BUILDING to block the fixing holes from underneath.
TOOLS REQUIRED
Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a
10mm socket or spanner.
TROJAN PLUS
ZSCREW32
x4
ZSCREW61
x130
ZSCREW340
x18
ZCOMPPLZS02
x8
ZCOMPPLAS22-23-24
x12
2x 2mm, 2x 3mm, 2x 5mm
BASE INSTRUCTIONS
Flat and firm base. Recommended: concrete, tarmac or paving flags.
Min. distance from walls/ shrubbery: 1000mm.
Min. base size (WxDxH) 2350mm x 1100mm x 50mm.
LEVELING THE UNIT
Correctly level the constructed unit using the shims (ZCOMPPLAS)
provided prior to fixing the unit to the ground. Slide the packing pieces
under the corners of the unit base as required until an equal gap has
been achieved around the door allowing for its smooth operation and
alignment.
Warning: some panels may weigh over
20Kg. Beware of manual handling
Warning: Please keep
this key card safe! Refer
to if replacement key is
required.
10mm
Spanner
18V
For maintenance instructions of this product visit www.asgardsss.co.uk
x2
LH SIDE P
ANEL
38982
x1
LH BACK P
ANEL
38984
x1
RH BACK P
ANEL
38985
x1
BASE P
ANEL
39030
x1
FASCIA
53020
x1
RAIN GUARD 053023
x1
00001
YOUR UNIQUE
KEY CODE
RH SIDE P
ANEL
38983
x1
RH DOOR 53355
x1
LH DOOR 53025
x1
LH FRONT
P
ANEL
53016
x1
RH FRONT
P
ANEL
53019
x1
6mm
Dia.
Posi-Driv
Screwdriver
TOP
PANEL
38981
x1
All manuals and user guides at all-guides.com
