ASG, Division of Jergens, Inc.
15700
S. Waterloo Road | Cleveland, OH 44110-3898 | Phone: (888) 486-6163 | Fax: (216) 481-4519 | Email: [email protected] | Web: www.asg-jergens.com | Revision: 8/24/2020 | Page 1 of 3
TLB-C Brushless Electric Screwdrivers
Operation Manual
Table of Contents
Overview ...................................................................................................................1
General Safety Rules...................................................................................................1
Safety Instructions ......................................................................................................2
Description of Operation .............................................................................................2
Grounding Instructions ...............................................................................................2
Installation Instructions ..............................................................................................2
Torque Adjustment Operation .....................................................................................3
Servicing ....................................................................................................................3
Warranty ....................................................................................................................3
Overview
Thank you very much for selecting the TLB-C Brushless Electric Screwdriver.
Read this manual before placing tool in service or operation. Save
these instructions for future reference. It is the responsibility of the
employer to place the information in this manual into the hands of
the operator. Failure to observe the following warnings could result
in injury. When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and
personal injury. After having read these instructions, keep them in a
convenient place so you or the operator can refer to them whenever
necessary.
Note:
ASG is not responsible for customer modification of tools for
applications on which ASG was not consulted
PLEASE NOTE: When repairing or replacing tools or
components on any TLB Series purchased in 2016 or prior,
please contact ASG representative
General Safety Rules
Electrical Safety
• Keep work area clean and well lit.
• Electric screwdriver plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) electric screwdrivers.
These precautions will reduce the risk of electric shock.
• Do not expose an electric screwdriver to rain or wet conditions as this will increase
the risk of electric shock.
• Never use the cord to carry, pull, or unplug the electric screwdriver. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
Personal Safety
• Stay alert and pay attention to your surroundings when operating an electric screwdriver.
Do not use an electric screwdriver while you are tired or under the influence of drugs,
alcohol, or medication, as this could result in serious personal injury.
• Ensure the switch is in the off position before plugging in to avoid accidental
starting.
• Keep proper footing and balance at all times.
Electrical Screwdriver Use and Care
• Use the correct electric screwdriver and power supply for your application.
• Do not use an electric screwdriver if the switch is broken. Any electric screwdriver
that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing the electric screwdriver. Such preventive safety
measures reduce the risk of starting the electric screwdriver accidentally.
• Keep out of reach of children and untrained personnel. Electric screwdrivers are
dangerous in the hands of untrained users.
Service
• Have your electric screwdriver serviced by ASG. This will ensure that the safety and
quality of the electric screwdriver is maintained.