7
Functional indicator
OK screwing with preset torque
NG screwing
Beep sound
1 short beep
1 long beep
(7) Torque adjustable
The torque is able to be changed by the following steps
(7.1)
Remove the battery from the device or set the rotation
switch to neutral position to prevent the tool from starting
up unintentionally.
(7.2)
Open up the torque safety cover cap; follow the illustration
on the right. Insert the torque wrench to adjust your torque
higher or lower.
(7.3)
Adjust the torque in two directions (-) for less torque (+)
for more torque.
(7.4)
Use an ASG torque tester to confirm your torque setting.
Do not exceed the stop line of the high and low torque when making adjustments shown in diagram
3.
