Asentria SiteBoss 571, User Manual

Page: 98 / 128

Asentria SiteBoss 571 UserManual
Page 98
Serial Handshaking Low / High Alarm Enable
These are ON/OFF toggles to enable alarming on high or low handshaking levels. The default settings are OFF.
Serial Handshaking Low / High Alarm Actions
These options display the Action List, a menu where the action string for the alarm is configured. This field will be
empty [ ] if no actions have been configured, and will show [*SET*] if one or more actions have been configured.
Refer to
Actions List for more information.
Serial Handshaking Low / High Alarm Message
These fields are used to set the messages to be sent with any text-based action for this event. The default setting
is “Handshake Low/High” (maximum length for each is 126 chars).
Serial Handshaking Low / High Alarm Class
These options set the class for the event. When this option is selected, a list of the classes previously defined in
the
Class Table is displayed, from which you can select one to be assigned to this event.
Serial Handshaking Low / High Trap Number
Set the number to be sent with any SNMP traps for this event. Default is 510, but trap number can also be set in
the range of 1000
– 1199 as needed.
CPE Alarm Settings
These settings are used for configuring Customer Premises Equipment (CPE) monitoring functions. Configure the
equipment to monitor under Network Settings/
CPE Settings . Contact Asentria Technical Support for more
information.
SiteBoss 571 - CPE Alarm Settings
A) Alarm Enable [OFF]
B) Alarm Actions []
C) Alarm Trap Number [511]
D) Alarm Class [Info]
E) Return to Normal Actions []
F) Return to Normal Trap Number [511]
G) Return to Normal Class [Info]
Alarm Enable
This is an ON/OFF toggle to enable the CPE Down Event. The default setting is OFF.
Alarm Actions
This option displays the Actions List, a menu where the action string for the event is configured. This field will be
empty [ ] if no actions have been configured, and will show [*SET*] if one or more actions have been configured.
Refer to
Action List in the Features chapter for more information.
Alarm Trap Number
Set the number to be sent with any SNMP traps for this event. Default is 511, but trap number can also be set in
the range of 1000
– 1199 as needed.
Alarm Class
Set the class for the alarm. When this option is selected, a list of the classes previously defined in the Class Table
is displayed, from which you can select one to be assigned to this event.
Return to Normal Actions
This option displays the Actions List, a menu where the action string for the event is configured. This field will be
empty [ ] if no actions have been configured, and will show [*SET*] if one or more actions have been configured.
Refer to
Actions List for more information.
Return to Normal Trap Number
Set the trap number which can be useful when using SNMP trap managers that employ a trap numbering system
to help identify incoming traps. The default trap number for CPE Down Events is 511, but any number in the
alternate range of 1000
– 1199 can be used.