Asentria SiteBoss 530 User Manual
50
Answer String
sets the string that is presented when a user connects to the S530 via Telnet or modem. (Max
length 31 chars) Default setting is SiteBoss.
Escape Key
is the decimal ASCII character code of the key you must press three times to escape from
passthrough or other transparent modes. Default is 27, the <ESC> key.
Confirmation Prompt
is an ON/OFF toggle to set whether a confirmation prompt (
Are you sure (y/n)?
) is
displayed when the commands
DEFAULT
or
COLDSTART
are issued, and when clearing the settings for an
EventSensor in the EventSensor Setup menu. If there is no response within 30 seconds, the S530 will cancel the
command. Default setting is ON.
Time Stamp Format
toggles through three options for how time stamps are formatted: HH:MM, HH:MM:SS, or
BLANK. Default setting is HH:MM.
Date Stamp Format
toggles through four options for how date stamps are formatted: MM/DD, MM/DD/YY,
MM/DD/YYYY, or BLANK. Default setting is MM/DD.
Space After Date/Time Stamp
is an ON/OFF toggle to set whether a space is appended to the end of the
Date/Time stamp. Default setting is ON.
Prompt
sets the character(s) or settings values displayed as the command line prompt. Refer to the
section in the Features chapter for more information. Default setting is “>”.
(Max length 63 chars)
displays the System Date/Time menu where you can manage the clock, daylight savings
control, and configure a networked time server.
Joinable Pass-through
is an ON/OFF toggle to allow or disallow multiple user pass-through sessions. ON
allows more than one user to connect on a pass-through session. OFF does not allow more than one concurrent
pass-through session, and those attempting to join after the first user is connected will receive a “port in use” error
message. Default setting is ON.
Date/Time Settings
SiteBoss 530 - System Date/Time
A) Current Date [10/29/2009]
B) Current Time [11:21:11]
C) Adjust for Daylight Savings [ON]
D) GMT Difference (hours) [8]
E) GMT Difference Direction [BEHIND]
F) Enable Time Protocol [OFF]
G) Time Servers
Current Date
sets the date. The unit automatically calculates the day of the week to display on the Status
screen.
Current Time
sets the time (24 hour clock).
Note:
The date and time settings are maintained by means of an internal battery backup when power is
removed from the S530.
Adjust for Daylight Savings
is an ON/OFF toggle that allows automatic daylight savings time updating.
•
A brief explanation of daylight savings time (effective 2007): On the second Sunday in March, clocks
are set ahead one hour at 2:00 a.m. local standard time, which becomes 3:00 a.m. local daylight time.
On the first Sunday in November, clocks are set back one hour at 2:00 a.m. local daylight time, which
becomes 1:00 a.m. local standard time.
GMT Difference (hours)
sets the number of hours the current time zone is offset from GMT. Valid input ranges
from 0 to 12. Default setting is 8 hours.
Summary of Contents for SiteBoss 530
Page 6: ......
