Asentria SiteBoss 530, User Manual

Page: 54 / 140

Asentria SiteBoss 530 User Manual
48
Hostname/IP Address n
sets the hostname or IP address of the device(s) receiving SNMP Traps. The number
(1,2,3) corresponds to the “index” number for Traps as discussed in the Action List section of the Features
chapter.
More Hostnames/IP Addresses
displays the IP Address Definition Menu where three more hostnames or IP
Addresses (index 4,5,6) can be configured.
Email Address n
sets the Email address of the person(s) receiving Email alerts. The number (1,2,3)
corresponds to the “index” number for Email alerts as discussed in the Action List .
More Email Addresses
displays the Email Address Definition Menu where three more Email Addresses (index
4,5,6) can be configured.
Phone Number n
sets the phone number (index 1,2,3,4) to call for each dispatch, malert or modem callout as
discussed in the Action List .
Pager Number n
displays the Pager
n
Settings menu where each of four pagers can be configured (index
1,2,3,4) to call for pager callouts as discussed in the Action List.
Action Settings
displays the Action Schedule Settings menu where actions can be limited to defined days and
times.
Pager n Settings Menu
SiteBoss 530 - Pager 1 Settings
A) Pager Type [NUMERIC]
B) Pager Callout Number []
C) Pager ID []
D) Numeric Message []
E) Post Callout Delay (seconds) [15]
F) Post ID Delay (seconds) [5]
Pager Type
toggles between NUMERIC and ALPHA to select the type of pager to call. Default is NUMERIC.
Pager Callout Number
sets the phone number for the pager.
Pager ID
is used only with paging systems where many pagers share the same phone number. This is common
with alphanumeric pagers.
Numeric Message
is the series of digits (typically callback number) sent to a numeric pager.
Post Callout Delay
is the number of seconds the unit will wait before sending the pager ID. Default is 15
seconds.
Post ID Delay
is the number of seconds the unit will wait before sending any message data. Default is 5
seconds.
Action Settings Menu
SiteBoss 530 - Action Settings
A) Callout Attempts [5]
B) Callout Delay (seconds) [60]
C) Action Schedule [OFF]
D) Reminder Interval (minutes) [120]
E) Asentria Alarm Version [1.1]
F) Require Asentria Alarm ACKs [OFF]
Callout Attempts
sets the total number of times to attempt dispatch, Malert or modem callouts if previous attempts
fail. Default setting is 5.